|
NewI CPC-IEC43SZ-SE, a Wide-ranged Noise
Regulation Cover for IEC inlet plugs.
A first in the world, a Noise Regulation
Cover for IEC plug realized a further low
noise sound!!
** A Patent pending
The inlet cover shuts out noise mixing from
inlet and holds firmly the plug to prevent
it from being pulled out. Special alloy powder
built inside absorbs electromagnetic wave
and high frequency noise, realizing open
sound field with high S/N ratio. It can be
easily mounted also on a power supply tap
and/or audio equipment of other manufacturers.
Contactless noise induced filters that no
degradation of sound quality. Also, to prevent
radiation noise adopted polymer polymer inside.
Electromagnetic noise band special alloy
powder layer. Low-frequency noise bandwidth
of copper foil. Aircraft aluminum alloy by
high-frequency noise bandwidth. Success to
attenuate the range of noise. Realized very
reduced noise level, so only the music signal
beam, real music with rich sound. Also details
of harmonics components or pianissimo signal
will play nice. Can be attached to the inlet
of many kinds. If you can't install our lays
only the body produces the same effect.
mCPC-IEC43SZ SPECIFICATIONSn
‘ Material / ESpecial aluminum alloy for airplanes ESuper-high density special alloy powder@ ECopper foil EPolymer engineering polymer
‘ Forming / CNC machined
‘ Specification / ULTRA SZ physical processing
‘ Size / full length 60mm x outer diameterΣ 74 (inner diameter Σ43)
‘ Accessories / two M3 stainless-steel screws
for tightening
A Landmark! CPC-35SZ-SE
Just to mount to your power tap or wall consent for realizing high-end high quality sound.
High frequency noise control plug cover for Power Tap/Wall consent.
** Patent pending
With this plug cover the plate for noise
interception can be mounted more easily.
All you have to do is to stick it on the
surface of a power supply tap or a wall socket,
regardless of its kind. In most cases the
plug cover can be used also in the place
where mounting is difficult.
This cover is applicable for all kind of
wall-consent(UL, JIS, etc)
mCPC-35SZ-SE SPECIFICATIONSn
‘ Material / special alloy for airplanes (35mm)
‘ Forming / CNC machined
‘ Specification / ULTRA SZ physical processing
‘ Size / 96mmx57mmx35mm (height x width x
depth)
‘ Mounting method / 1mm thick double-sided
adhesive tape supplied
‘ Weight / approx. 175g
NEWIHigh-end wall power socket plate
New material wide-range noise suppressor
Super High-End Concentric Power Plate.
High-Grade Noise Suppressor AC Plate: CPP-2SZ^gf
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ͺπΚ^
@@
@@@@@@@@@
In addition to 30mm Air Craft Grade Aluminum-alloy,
10mm copper layer and 20mm layer of special
alloy-powder were combined to make 3 stratums
construction which can eliminate a noise
in every frequency range
We realized a super clean power supply by
succeeding technologies of our flag-ship
model "Triangle Power 6".
AC current is normally distorted by a stress
of several kind of noises such as high-frequency
noise, electrostatic noise and so on.
And by eliminating such a wide-ranged noise,
AC current will be clean and stress-free
for a smooth stream of AC current, and in
this reason, amplifiers and CD players will
also reproduce a high quality sound of very
high S/N ratio, as such noises do not come
into these components.
mCPP-2 SZ/HG SPECIFICATIONSn
Materials: Air Craft Grade Aluminum-Alloy(30mm),
Special Nickel-Coating High-Purity copper(10mm)
& Super high-density Special Alloy Powder.
Process: Solid Curvuing.
Material Processing: Ultra SZ Molecular treatment.
Size: 120~70~40 iW/H/D/j
Applicable for: PAD(Lebiton), Hubbel, etc.
| Since it was discovered that AC power supply is badly affecting to Hi-fi sound,There are several audio accessories concerning to the power supply.However, as concerning to a Consent-Plate, a priority of existing power plates is given to faculty and a design (shape), and non of them can be authorized as anAudio-Grade.Although, there are many grade of Power Tap, a Power plate and a Wall ConsentPlate have been ignored up to today.In the Audio field, a function (role) of such a plate should be basically to reduce EMI and FRI, to regulate a noise coming from AC power supply.Among several power cables and power taps to reduce a noise, we tried to seek for higher fidelity by reducing further noises by this Power Plate.In order to reduce noises coming through a Plug, this plate will cover a whole plug by its 25mm depth plug receptacle.This time, we arranged a new treatment "Super Cryogenic processing" in order to arrange a molecular construction of the material in a flat order and to improve a shield effect and a vibration characteristic.As a result, S/N ratio was remarkably improved and accordingly, a depth and a cubic effect on a sound stage was much improved even more than a result to use high-end Power taps. |
 |
|||
Materials: Air Craft Grade Aluminum-Alloy(15mm),
Process: Solid Curvuing. Material Processing: Ultra SZ Molecular treatment. Size: 120~70~15 iW/H/D/j Applicable for: PAD(Lebiton), Hubbel, etc. |
Process: Solid Curvuing. Material Processing: Ultra SZ Molecular treatment. Size: 120~120~30 iW/H/D/j Applicable for: PAD(Lebiton), Hubbel, etc. |
||
@
@